Hydraulic Filter With Regulator Controller
Technical Details
(1) Water entering to system in maximum of 10 bar inlet pressure, (2) Filtration process is starts while polluted water moving coarse sieve. In this section, large particulers are seperated from water to prevent harm of the inner part of the filter components and helps become more efficient implementation of the filtering process. Free of large particles in still polluted water passes through the fine sieve have smaller pores inner (3) and filtering process is completed. During the process of filtering particles are deposited on the fine sieve will cause clogged pores and differential pressure. Pressure regulator or the electronic controller opens drainage part (4) and water begins to drain (5) when pressure difference, on the emergence of a set level. Vacuum force occur during drain provides for the absorption of dirts by aids of brushs (6) – (7). During drainage of dirty water, provides rotation of the turbine (8) and gives nozzles and brushes axial and linear movement, so cleans sieves completely. Filtere water given the system from clean water outlet (9). System continues to operate without interruption during filtration.
Hydraulic Filter With Regulator Controller | ||||||
Product Code | Input-Output | Capacity | Area | Sieve Micron | In-Out Axle | Inch |
HF-RK-1020A | 2" | 16-25 m³/h | 1436 cm² | 110 | 250 mm | 1" 1/2 |
HF-RK-1025A | 2 1⁄2" | 20-35 m³/h | 1436 cm² | 110 | 250 mm | 1" 1/2 |
HF-RK-1030A | 3" | 25-55 m³/h | 2154 cm² | 110 | 350 mm | 1" 1/2 |
HF-RK-1040A | 4" | 50-110 m³/h | 3590 cm² | 110 | 500 mm | 1" 1/2 |
HF-RK-1050A | 5" | 80-150 m³/h | 5026 cm² | 110 | 750 mm | 2" |
HF-RK-1060A | 6" | 140-225 m³/h | 7180 cm² | 110 | 1000 mm | 2" |
HF-RK-1080A | 8" | 140-260 m³/h | 7180 cm² | 110 | 1000 mm | 2" |
HF-RK-1280A | 8" | 140-320 m³/h | 7180 cm² | 110 | 1000 mm | 2" |